Skip to content
Get a quote

Paint correction

We take a thin layer off the clear coat, and the scratches go with it. Only as much as needed and not a micron more, which is why we start by measuring.

Time in the studio
1 to 3 days
We remove
up to 9 µm
Price
from 770 zł
Gloved hands guiding a polisher over a dark hood next to a headlight

First we measure all the paint

The gauge shows paint thickness in microns and tells the story of the car before anyone switches on a polisher. Measure the compact that has just come in.

Thickness gauge0 µm

Pick a panel on the car or from the list.

    Paint is as thick as a sheet of paper. We count every micron.

    Factory paint is usually 100 to 130 microns with all its layers. Scratches sit in the clear coat, which is about 40 microns. A correction only takes off as much as needed, which is why we measure the paint on every panel first.

    0 µm
    Thickness gauge110 µm
    PPF film200 µm
    Ceramic coating1.5 µm
    Clear coat40 µm
    Base coat15 µm
    Primer35 µm
    E-coat20 µm
    Steelabout 0.7 mm
    Three scratches in the clear coat: from a car wash (1.5 µm), from a key (4 µm) and a deep one (9 µm). Move the correction slider.

    One, two or three stages

    We choose the number of stages after measuring and inspecting under the lamps. Each further stage means a finer compound and more gloss.

    Three kinds of paint correction
    RefreshTwo-stage correctionThree-stage correction
    Best forDull paint and light car wash scratchesScratches, holograms and brush marksDeep scratches, a car after years without care
    Scratches removedabout 60%85 to 90%up to 95%
    We removeup to 2 µmup to 5 µmup to 9 µm
    Gloss afterwardsabout 85 GUabout 90 GUover 90 GU
    Time in the studio1 day2 days3 days
    Price for a compactfrom 900 złfrom 1,700 złfrom 2,600 zł
    Quote a refreshQuote a correctionQuote a correction

    Prices for other car sizes are in the price list.

    Questions about correction

    Is your question not here? Call us: +48 52 000 00 00.

    How long does a paint correction take?

    One to three days, depending on the state of the paint and the number of stages. We give the exact time after the inspection and paint thickness measurement.

    Does a correction weaken the paint?

    We take a few microns off about 40 µm of clear coat, so there is enough left for years. That is why we measure the paint before correcting and do not polish where there is too little.

    Can every scratch be removed?

    No. A scratch that shows the primer needs a paint touch-up. Polishing makes it shallower and rounds its edges, but does not remove it completely.

    How long does the result last?

    Until a brush car wash scratches the paint again. With a ceramic coating and two-bucket washing the gloss lasts for years.

    What does a correction cost for your car?